MAHLE ebikemotion error 6: Error #6 – Motor sensor signal error

What it means

MAHLE/ebikemotion technical sheet: check the motor cable and connector pins; if it continues the motor may need replacing (dealer job).

Likely causes

• Damaged motor cable
• Bent or misaligned connector pins
• Motor fault

Symptoms

• Flashing pink iWoc
• No assist

How to fix it

1. Switch the system off and on again.
2. Contact an authorised dealer to check the motor cable and connector.

How urgent is it?

Dealer check needed.

Applies to

• MAHLE ebikemotion X35 / X35+ with iWoc One

More MAHLE ebikemotion codes

• PINK-BLINK iWoc LED flashing pink (system error)
• RED-SLOW-FLASH iWoc LED slow red flash (battery 10–15%)
• RED-FAST-FLASH iWoc LED rapid red flash (battery under 10%)
• 12 Error #12 – Voltage too low
• 35 Error #35 – Sensor voltage out of range
• 36 Error #36 – Light voltage out of range

All 11 MAHLE ebikemotion codes →