Shimano STEPS / EP error E030: Setting / component mismatch

What it means

On E6000 a setting error was detected. On E6100/E7000 the installed shifting component differs from the one configured in the system. Assist is not provided.

Likely causes

• Parts changed without updating settings
• Incorrect configuration

Symptoms

• No assist
• E030 shown

How to fix it

1. Turn the power off and on with the battery switch.
2. If it continues, contact your place of purchase or distributor to correct the settings.

How urgent is it?

Needs a dealer to correct the configuration.

Applies to

• STEPS E6000 (SC-E6000)
• STEPS E6100 / E5000 (SC-E6100)
• STEPS E7000 (SC-E7000)

More Shimano STEPS / EP codes

• E023 Electrical failure inside the battery
• E024 Communication error with the bike system
• E025 Genuine drive unit not connected / cable disconnected
• E033 Firmware not compatible with the system
• E043 Cycle computer firmware may be damaged
• E295 Tampering detected

All 22 Shimano STEPS / EP codes →